Cleaning a car's AC evaporator temp sensor can fix cooling and airflow issues?

checkthis · automated fact-check · How we check · Reel by @seleks25

The symptoms and sensor functions described are accurate, but manufacturer bulletins note that internal electrical failure requires replacing the sensor. Evaporator temperature sensor faults cause AC icing, reduced airflow, and warm air. Removing and reinstalling the sensor can fix issues caused by dirt or loose seating, but internal thermistor drift requires replacing the component as detailed in manufacturer service bulletins.

3 claims checked
5 sources
Checked 11 Nov 2026
Main source: Page 1of 6 SI B64 06 13 March 2014 Body Equipment Technical Service This Service Information bulletin supersedes SI B64

▶

The Reel we checked

@seleks25

This Tiny Sensors Could Be Responsible For Your AC Problems #cars #carrepair #mechanics #fypviralシ

Watch on Instagram ↗

What we checked

The evaporator temperature sensor is located near the driver side footwell above the accelerator pedal in some cars.“The following steps will be performed from the lower passenger’s footwell area at the bottom of the IHKA housing.”Page 1of 6 SI B64 06 13 March 2014 Body Equipment Technical Service This Service Information bulletin supersedes SI B64 + 1 more

A dirty evaporator temperature sensor can affect the data sent to the car's computer.“The module uses this data to decide when to turn the compressor on and off”AC Evaporator Temperature Sensor: Signs of Failure

A malfunctioning or dirty evaporator temperature sensor can cause a car AC system to freeze up or fail to cool properly.“Certain 2020MY Santa Fe vehicles (TMA) may experience air conditioning not blowing cold air from the vents after some period of normal operation. This condition may be caused by an out of specificatio”Microsoft Word - 21-HA-001H- Evaporator Temperature Sensor Inspection and Replacement + 1 more

Our read of the video

The video demonstrates a genuine removal, cleaning, and reinstallation of an evaporator temperature sensor in a car's footwell area.

An AI assessment from the footage alone; watch the video and judge for yourself.

What the Reel doesn't tell you

While cleaning and reinstalling the sensor can fix issues caused by dirt or improper seating, manufacturer service bulletins state that internal thermistor drift or electrical faults require replacing the sensor.
General Motors technical service bulletins state that evaporator icing and poor AC performance are often caused by an unseated sensor, which is corrected by pressing the sensor firmly until it clicks into place.
Hyundai service bulletins document that out-of-specification evaporator temperature sensors cause AC cooling failure after normal operation, requiring inspection and replacement.

Short version

🧩 HALF THE STORY 👉 Cleaning an AC evaporator temp sensor can fix airflow and cooling issues caused by dirt, but internal electrical failures require replacing the component. 👉 Manufacturer service bulletins note that internal thermistor drift requires replacing the sensor, though cleaning can fix issues from dirt or loose seating. 🔎 Full check: send this Reel to @checkthis.chat